 |
Home > Car Audio > Amps > Crossfire Class D Amps
|
|
| High current Class "D" mono subwoofer amplifier, 150w x 1RMS into 4 ohms, Variable Lowpass Crossover from 50 to 250Hz, 5 way protection circuits, MOSFET power supply, CFR-3 analog 300Wx1 RMS into 2 ohm at 12.5 volts8"W x 2.1"H x 9.5"L
|
|
|
|
| High current Class "D" subwoofer amplifier, 150w x 1RMS into 4 ohms Continuously variable 12dB x-over between 50 and 250Hz, Continuously variable subsonic filter between 20 and 50Hz with on/off circuit, RCA preamp output, CFR-3 analog subwoofer level control, 600W x1 into 1 ohm.9.3"W x 2.1"H x 11.5"L
|
|
|
|
| Bridgeable 5 channel amplifier, 50Wx4 RMS with 300Wx1 Class D sub channel, 700W Max, Variable Crossovers: 50 to 250Hz Highpass for front and rear, 50 to 150Hz lowpass for sub, Nickel plated RCA inputs for all channels, 2/4 CH switch, int/ext sub input switch. All channels 2-ohm stable, Remote port for optional CFR-3 Subwoofer level control, 5 way protection circuit, MOSFET power supply 9.3"W x 2.1"H x 18.5"L
|
|
|
|
| High current Class "D" subwoofer amplifier, 250w x 1RMS into 4 ohms Continuously variable 12dB x-over between 50 and 250Hz, Continuously variable subsonic filter between 20 and 50Hz with on/off circuit, RCA preamp output, CFR-3 analog subwoofer level control, 1000W x1 into 1 ohm.9.3"W x 2.1"H x 14.5"L
|
|
|
|
| High current Class "D" subwoofer amplifier,1000w x 1RMS into 4 ohms Continuously variable 12dB x-over between 50 and 250Hz, Continuously variable subsonic filter between 20 and 50Hz with on/off circuit, RCA preamp output, CFR-3 analog subwoofer level control, 2000W x1 into 2 ohm. 9.3"W x 2.1"H x 22"L
|
|
|
|
| High current Class "D" subwoofer amplifier,2000w x 1RMS into 4 ohms Continuously variable 12dB x-over between 50 and 250Hz, Continuously variable subsonic filter between 20 and 50Hz with on/off circuit, RCA preamp output, CFR-3 analog subwoofer level control, 4000W x1 into 2 ohm. 9.3"W x 2.1"H x 25.75"L
|
|
|
|
|
